Produse pentru • i (357)

Revers-Nadeln werden nach den gleichen Herstellungsverfahren wie Metall-Ansteck-Pins produziert. Als Befestigung dient eine Reversnadel mit Sicherungskappe. Mindestmenge: ab 100 Stück Verfahren:2-farbig bedruckt im Siebdruck mit Epoxydharzüberzug. Lorbeerkranz im Spritzgussverfahren hergestell Material:Messing (Pin) Lorbeerkranz (Metallguss Legierung) Plattierung:Gold plattiert

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 5 mit bedrucktem Satinband in 20 mm Breite, in verschiedene Längen und diversen Farben. Das Band wird zusätzlich mit einem Klippverschluss ausgestattet. Mindestmenge: 300 Stück Verfahren:1-farbig bedrucktes Satinband im Siebdruck Band:flaches Polyesterband mit aufgenähtem Satinband Bandbreite:20 mm (Polyesterband) 16 mm (Satinband) Accessoires:Karabiner Egg LA-20, Metall/Kunststoff-Klippschließe LA-07

For sliding properties improvement of machine parts, apparates and precision machinery, especially for microfinished surfaces For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulphuric- and nitric acidFor best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Apply on small parts in series production by tumbling, under addition of small amounts powder and tumbling parts, until a complete MoS₂ film is formed. Brush the powder onto bigger surfaces. Operating temperature:-185 °C → +450 °C Particle size:2.5 - 5.0 µm, max. 15 µm

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 4 mit bedrucktem Satinband in 20 mm Breite, in verschiedene Längen und diversen Farben. Mindestmenge: 300 Stück Verfahren:2-farbig bedrucktes Satinband im Siebdruck Band:flaches Polyesterband mit aufgenähtem Satinband Bandbreite:20 mm (Polyesterband) 16 mm (Satinband) Accessoires:Drehkarabiner LA-05, Sicherheitsverschluss LA-15

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering Operating temperature:-60 °C → +100 °C Thread friction:µ total = 0.08 - 0.10

For loosening and restoring the usability of rusted threads such as screws, turnbuckles, spindles and stud bolts For removing rust from metal surfaces For removing flash rust and rust stains For cleaning metallic encrustation and oil residues Advantages and benefits Chemical reaction – actively breaks down or dissolves rust layer Environmentally friendly formula – ecologically harmless in use Does not contain petrol or mineral oil – workplace-friendly Low evaporation rate – enhanced effect through longer exposure time

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601 Operating temperature:-40 °C → +80 °C Density (20 °C):0.81 g/ml Viscosity (40 °C):> 21.5 mm²/s Salt spray test:> 100 h

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601 Density: (20 °C):0.98 g/ml

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free Operating temperature:-5 °C → +80 °C Density (20 °C):1.06 g/ml Viscosity (40 °C):20 - 24 mm²/s

Extreme-temperature grease on the basis of perfluorinated polyether oils (PFPE) for use in food processing technology at maximum loads and temperatures. Grease lubrication of friction and rolling bearings in the high-temperature range Application, for example at tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in continuous furnaces, etc. Use at bearing points under influence of chemicals/fuel Advantages and benefits Maximum water and steam resistance Extraordinary resistance to chemicals, for example to solvents, for example benzene, benzol, acetone, trichloroethylene and against inorganic acids, such as sulphuric acid, hydrochloric acid and nitric acid as well as stearic acids, alcohols and halogens Excellent plastic and elastomer compatibility For long-term lubrication of lubrication points subjected to high pressure up to 300°C Operating temperature:-40 °C → +280 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):390 mm²/s Four-ball test rig (welding load):> 10,000 N

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1 registered MOSH-/MOAH-free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Also available as spray version OKS 3711 Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250 Operating temperature:-40 °C → +200 °C/+1,400 °C (lubrication/separation) Press-fit:µ = 0.10, no chatter Four-ball test rig (welding load):3,600 N Thread friction (M10/8,8):µ total = 0.12

Lubrication of friction, rolling and pivoting bearings, splined shafts, knockout spindles and sliding surfaces of all kinds under normal loads and all sliding speeds common for grease lubrication Supports sealing of bearings and corrosion protection Advantages and benefits Highly effective due to optimum combination of components Good resistance to pressure and water Fewer downtimes and repairs as a result of reduced wearing Resistant to ageing and oxidationFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Operating temperature:-30 °C → +120 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):110 mm²/s Four-ball test rig (welding load):2,000 N

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451 Operating temperature:-30 °C → +200 °C Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds Dry lubrication in dusty environment, to avoid adhesions Coating of punching tools Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Increased wear protection Radiation and vacuum-resistant Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs Also available as spray version OKS 511 Operating temperature:-180 °C → +450 °C Press-fit:µ = 0.07, no stick-slip

Lubrication of tooth flanks and sliding surfaces of machine elements of all types, for example sliding bearings, slideways, guides, etc. Run-in lubrication of heavily loaded tooth flanks and sliding surfaces Lubrication of jackscrews in the motor vehicle and train technology Cable lubrication Advantages and benefits High effectiveness thanks to graphite share Extremely low friction at highest load Increased operational reliability of moving parts due to run-in-supporting formation of sliding film Minimum consumption due to realisable thin-film lubrication Excellent pressure resistance Waterproof Free of bitumen, solvents, heavy metals and chlorine Operating temperature:-40 °C → +200 °C NLGI grade:1 Base oil viscosity (40 °C):500 mm²/s Four-ball test rig (welding load):4,200 N FZG damage level:power level > 12

aXionClips sind in 11 verschiedenen Grundmodellen verfügbar. Der aXion-Clip wird im Tampondruck direkt bedruckt, individuell nach Ihrer Vorlage 1- bis 8-farbig oder nach 4C Euroskala. 11 verschiedene Ausführungen stehen zur Verfügung: MODELL 1 Max. Druckfläche: 22 x 10 mm MODELL 2 Max. Druckfläche: 20 x 12,5 mm MODELL 3 Max. Druckfläche: 22 x 14 mm MODELL 4 Max. Druckfläche: 22 x 15 mm MODELL 5 Max. Druckfläche: 18 x 18 mm MODELL 6 Max. Druckfläche: 20 x 12,5 mm MODELL 7 Max. Druckfläche: 20 x 20 mm MODELL 8 Max. Druckfläche: 22,5 x 13,5 mm MODELL 9 Max. Druckfläche: 20 x 9,5 mm MODELL 10 Max. Druckfläche: 20 x 16 mm MODELL 11 Max. Druckfläche: 22 x 16 mm Mindestmenge: 2.500 Stück Verfahren:blanko, ohne Aufdruck Material:Federstahl Ausführung:Modell 7

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-30 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):240 mm²/s Coefficient of friction SRV (DIN 51834-2, 50 °C):µ = 0.125

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671 Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

For low-viscosity OKS products in 25 l canisters Advantages and benefits Resistant to OKS products Thread, internal:Ø 55.5mm ±0.3 Thread, external:Ø 60.3mm ±0.3 Weight:54.5g

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 Operating temperature: -40 °C → +200 Press-fit:µ = 0.10, no chatter Four-ball test rig (welding load):3,600 N Thread friction (M10/8,8):µ total = 0.12

OKS 4240 is a special grease for the lubrication of ejector pins in the plastics industry. Lubrication of ejector pins in the plastics industry at high temperatures and slow movements Lubrication of rolling and friction bearings at extremely high temperatures and aggressive operating conditions Advantages and benefits Extraordinarily good resistance to vapours occurring during plastic processing Good plastic and elastomer compatibility Excellent temperature resistance Lowest evaporation losses, also at high temperatures ensure long regreasing intervals Good media resistance Also suitable for fast-runing bearings thanks to low share of solid lubricants Operating temperature:-20 °C → +300 °C NLGI grade:2 DN factor (dm x n):350,000 mm/min Base oil viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):4,800 N

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature Also available as spray version OKS 571 Operating temperature:-180 °C → +260 °C Press-fit:µ = 0.07 Thread friction (M10/8,8):µ total = 0.10

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):66 mm²/s

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease Operating temperature:-20 °C → +130 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):185 mm²/s Four-ball test rig (welding load):3,600 N

Jacken mit Logo von HAKRO und TRIGEMA. Lassen Sie Ihr Firmenlogo auf Jacken besticken oder bedrucken. Damen- und Herrenjacken in mehreren Passformen. Schnelle & zuverlässige Lieferung.